thermofer® | WALL
Cosiness from the walls
If you feel the heat radiation from all directions, it is the most comfy for you. The thermofer® | WALL system, which is invisibly integrated close to the surface into the plaster layer, is particularly well-suited for this purpose. You can set each heating element to the appropriate temperature to create your individual room climate.
This energy-efficient system is suitable for large and small, low and high-ceilinged rooms, whereby it is particularly economical in high-ceilinged rooms.
The supply voltage is 42 V AC and therefore fulfils the requirements in electrical safety.
thermofer® | WALL is certified as construction product according to EN 13501-1:2010 with the fire classification E.
Formats / Wattage
The thermofer® | MESH can be delivered confectioned into different measurements for the thermofer® | WALL and thermofer | CEILING systems. If necessary, it can be cut to size. The wattage is 120 or 210 W/m².
Thin layer structure
Only 10-20 mm layer structure incl. permeable insulation fleece with a very low thermal conductivity λ < 0,018 W/(m*K)
The just 1.5 mm thick specially coated thermofer | MESH heating fabric is integrated close to the surface in walls, floors, ceilings or system construction elements. The overall structure of a top layer with heating fabric usually comes to 10 to 20 mm. The surfaces of the wall, floor or ceiling heat up quickly and evenly thanks to the special coating and the tightly woven mesh of the net. The thus heated surfaces radiate pleasant warmth and ensure a cosiness and good room climate within minutes.
Easy and invisible fitting
thermofer® | WALL is very easy to install:
- Fix the thermofer® | FLEECE with a bond coat to the wall.
- Mount the thermofer® | MESH with a bond coat onto the insulation fleece (thermofer® | FLEECE).
- Run and connect the cable for the energy supply.
- Apply top later.
And the feel-good heating is ready to go!
Very robust (no leakage)
Through the robust design of the thermofer® | MESH and the unique net structure, retrofitting lamps, curtains, pictures, TV mounts and so forth is no problem. There is no risk of leakage with our system!
thermofer® | CONTROL
Comfortable heating control
For all thermofer® systems we offer you a control system aligned with your individual needs. From a simple on/off switch via a thermostat, which controls the surface temperature according to your specifications, all the way to a smart solution that takes into consideration varying values (presence, outside temperature, solar radiation and so on) in its control. thermofer® can thus allow you the maximum comfort and highest possible energy saving.